Enterasys csx400 Benutzerhandbuch

CSX400 and CSX400-DC User’s Guide

135

The Flash Download screen allows you to download a firmware image from 

a TFTP server to the CSX400.

The Bridge Setup screen allows you to select a Spanning Tree protocol and 

enable/disable switch ports.

The Router Setup screen accesses two other screens that provide general IP or 

IPX routing configuration and allow you to enable or disable the Routing Information Protocol 
(RIP) and the Service Advertisement Protocol (SAP) features.

 – The WAN Setup menu item accesses two other screens that provide WAN physical 

configuration and WAN Interface configuration access to enable a WAN link to be set up. 

The System Level screen displays the physical address (MAC address) of the CSX400 and allows 
you to set the following parameters:

System Date

System Time

Host IP Address

Subnet Mask

Default Gateway

Default Interface

If you have a WPIM-HDSL installed in your CSX400, refer to the WAN Setup section of 
this chapter for configuration information. For all other WPIMs, refer to your specific 
WPIM(s) Local Management Guide for information on configuring the CSX400 for a 
Wide Area Network Interface

.