Enterasys csx400 Benutzerhandbuch

156

CSX400 and CSX400-DC User’s Guide

Routing Services allows you to choose the ports that you want to configure for IP routing. To select 
a router port to configure for IP routing, complete the following steps:

Use the arrow keys to highlight the PORT option.

Type in the number of the port that you want to configure for IP routing and then press ENTER.

If you type in an invalid port number, the error message “PORT NUMBER IS OUT OF RANGE” 
displays. Perform steps 1 and 2 again.

All IP hosts must have an IP Address for each network interface. These addresses identify each 
network connection. 

To enter the IP address for a router port, complete the following steps:

Use the arrow keys to highlight the ADDRESS option.

Type in the IP address and then press ENTER.

Once an IP address is entered, the default Subnet Mask automatically enters into the Mask field. To 
to change the default Subnet Mask for a router port, complete the following steps:

Use the arrow keys to highlight the MASK option.

Type in the Subnet Mask for the IP address that you have assigned.

On each port, Frame Type specifies the format of the frame in which IP packets are encapsulated 
for transmission. The Frame Type options available for each router port are dependent on the type 
of media supported by that router port.

To select the Frame Type for a port, complete the following steps:

Use the arrow keys to highlight the Framing option.

Use the ENTER key to toggle the entry to the correct Frame Type for the port.

You can type in the port number, or you can use the 

 option at the bottom of 

the screen to scroll through the list of the ports on your device. To use the 

option, use the arrow keys to highlight the 

(to go forward), or the 

 (to go backward), 

and then press ENTER to scroll through the available ports in the direction you have 
selected. You can also use the + and - keys to scroll through the available ports.