Enterasys csx200 Betriebsanweisung

128

CSX200 Family User’s Guide

The version number of the IP Routing used on the CSX200.

Displays the amount of time elapsed since an IP address was assigned to 

the CSX200.

Describes the selected Port.

Displays the physical (MAC) address of the CSX200.

Displays the type of interface used by the specified port.

Displays the operational status of the selected port.

This section provides a general overview of the procedures required to configure the CSX200. The 
following list describes each of the IPX General Config Screen fields.

Use this field to select the routing port that you wish to configure.

Use this field to select the format of the Frame in which IPX packets are 

encapsulated for transmission.

Use this field to set the Maximum Transmission Unit (MTU).

Use this field to enable IP Routing Services.

Use this field to enable IP Forwarding.

Use this field to assign an IP Address to the port that you wish to configure.

Routing Services allows you to choose the ports that you want to configure for IPX routing. To 
select a router port to configure for IPX routing, use the arrow keys to highlight the PORT option.

You can type in the port number, or you can use the 

 option at the bottom of 

the screen to scroll through the list of the ports on your device. To use the 

option, use the arrow keys to highlight the 

(to go forward), or the 

 (to go backward), 

and then press ENTER to scroll through the available ports in the direction you have 
selected. You can also use the + and - keys to scroll through the available ports.