Enterasys csx150 Anleitung Für Quick Setup
QUICK START
12 CyberSWITCH
U
SING
A
10B
ASE
2 (BNC) LAN C
ONNECTION
If you plan on connecting your PC to an CyberSWITCH using the 10Base2 LAN port, this is the type
of connection you will use. Note that the 10Base2 LAN port is an optional CyberSWITCH feature.
of connection you will use. Note that the 10Base2 LAN port is an optional CyberSWITCH feature.
Use the following graphic and instructions to complete the connection.
1.
Attach one BNC T-connector to the 10Base2 port of your PC and one to the10Base2 port of the
CyberSWITCH.
CyberSWITCH.
2.
Connect one end of a 10Base2 cable (BNC connectors with thin wire coax) to your PC’s BNC T-
connector, and the other end to the CyberSWITCH’s BNC T-connector.
connector, and the other end to the CyberSWITCH’s BNC T-connector.
3.
For each BNC T-connector, the other side of the T-connector must either have another 10Base2
cable connection, or have a BNC terminator as shown in the above graphic.
cable connection, or have a BNC terminator as shown in the above graphic.
BRI Term 10BT 10B2 Console DCPower Reset
1 2
T Connector
Thinwire
Coax
BNC
Connector
10B2
1 2
T Connector
BNC
Connector
To PC
Terminator