Enterasys ssr-atm29-02 Betriebsanweisung

Chapter 13: Configuring Security on the SSR

214

CoreWatch User’s Guide

4.

Do one of the following:

–

If you are applying the ACL to an IP interface, double-click the interface’s Applied 
IP ACLs object. 

–

If you are applying the ACL to an IPX interface, double-click the interface’s Bound 
IPX Security object and then its Applied IPX ACLs object. 

5.

Expand the configuration tree until you locate the ACL you want to apply. Select that 
ACL and do one of the following:

–

If you are applying the ACL to an IP interface, drag the selected ACL to the 
Applied IP ACLs object of the interface to which you are applying the ACL.

–

If you are applying the ACL to an IPX interface, drag the selected ACL to the 
Applied IPX ACLs object of the interface to which you are applying the IPX ACL.

–

Click the Copy button and then select the Applied ACLs object of the interface to 
which you want to apply the ACL. Click the Paste button.

6.

If you are applying multiple ACLs to an interface, configure those ACLs to govern 
either inbound traffic or outbound traffic. To do so, take the following steps:

a.

Click an ACL that you want to apply to inbound traffic. In the Access Control 
List: Edit ACL

 dialog box that appears, ensure that there is a check mark in the 

Input check box and also make sure the Output check box is blank. Then click OK.

b. Click an ACL that you want to apply to outbound traffic. In the Access Control 

 dialog box that appears, ensure that there is a check mark in the 

Output check box and also make sure the Input check box is blank. Then click OK.

Note: When applying multiple IP ACLs to an IP interface, one ACL must 

govern inbound traffic and the other ACL must govern outbound traffic. 
When applying multiple ACLs of the same type (IPX, IPX RIP, and IPX 
SAP) to an IPX interface, one ACL must govern inbound traffic and the 
other must govern outbound traffic.

Applying an ACL by Editing an Interface’s Definition

To apply an ACL by editing an interface’s definition:

1.

Start Configuration Expert if you have not already done so. 

2.

Open the configuration file you want to modify and then double-click that file’s 
Routing Configuration object.

3.

Do one of the following:

–

If you are applying an IP ACL, double-click the IP Routing Configuration object. 
Then double-click the IP Interface Configuration object.

–

If you are applying an IPX, IPX RIP, or IPX SAP ACL, double-click the IPX Routing 
Configuration object. Then double-click the IPX Interface Configuration object.