Enterasys atx Betriebsanweisung
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
Configuring
3-39
Mirror Filters with LOCAL Port Mirroring:
• Desired - analyze IP traffic from station A (on P2) to station B (on
P3) and vice versa
• Implementation - add a PMEntry and PMExit filter to ports 2
and 3 with Protocol Type of 800(type IP in hex).
The reason for a PMEntry and PMExit filter is when A and B
communicate there is communication both ways, i.e. IP packets are
transmitted and received by P2.
communicate there is communication both ways, i.e. IP packets are
transmitted and received by P2.
3.11.5 Example #2: REMOTE Port Mirroring
Port 1 on ATX #1 is the diagnostic port where the analyzer resides.
Ports 2 on ATX #2 is the mirrored port.
Port 5 on ATX #1 has an ip address of 134.141.100.1.
Port 4 on ATX #2 has an ip address of 134.141.100.2 .
(P4 has to have an ip address assigned so ATX #2 will have an ip to
ARP with.)
ARP with.)
Config on
ATX #1
ATX #1
mirror
remote to 1
discard
remote to 1
discard
or
mirror
remote to 1
truncate
remote to 1
truncate
P5 P4
P1 P2
ATX LAN Switch #1
ATX LAN Switch #2