Enterasys atx Betriebsanweisung
3-44
Configuring
Other
- enables stripping and caching of RIF on AppleTalk,
SNA and NetBIOS frames
All
- enables stripping and caching of RIF on IP, IPX and
OTHER (default when enabled)
On
- enables SRTB globally; enabled per port when SRT is
switching mode
Off
- disables SRTB globally (default)
STE
- enables the ATX to use a Spanning Tree Explorer frame
when transmitting onto a Source Route network that it does
not have a RIF entry for (default when enabled)
not have a RIF entry for (default when enabled)
ARE
- enables the ATX to use a All Route Explorer frame when
transmitting onto a Source Route network that it does not have
a RIF entry for.
a RIF entry for.
3.16.2 SRTB Usage in the ATX
The table below describes the results of the RIF; it does not take
into consideration frame translations. The translations will work
the same as before. For this table, it is assumed that a transparent
(TP) frame enters a TP configured port and a SR frame will enter a
SR port. Either a TP or SR frame can enter a port configured for
SRT.
into consideration frame translations. The translations will work
the same as before. For this table, it is assumed that a transparent
(TP) frame enters a TP configured port and a SR frame will enter a
SR port. Either a TP or SR frame can enter a port configured for
SRT.
Table 3-3
SRTB USAGE IN THE ATX
Entrance
Port Config
Port Config
Exit Port
Config
Config
Strip and
Cache
Cache
Append RIF
from Data
Base
from Data
Base
Forward as:
TP (Eth,
FDDI, or TR)
FDDI, or TR)
SRT (TR
only)
only)
NO
YES
ARE OR
STE (null
RIF)
STE (null
RIF)
SR (TR only)
SRT (TR
only)
only)
NO
NO
SOURCE
ROUTE
ROUTE