Enterasys atx Betriebsanweisung

5-18

Filters

 If you want the filter to have another index number, enter the 
value you wish to use.

LCM displays the filter you have just entered and prompts you 
whether you want to save it. Enter y (Yes) to save the filter or n 
(No) to cancel it. If you save the filter, it is redisplayed.

You can make changes to filters that you have already set up. You 
modify a filter in much the same way as you add a filter. LCM 
prompts you through each field. To modify a filter, begin with the 
steps below, then follow the prompts as if you were adding a filter:

1. Type: 

.

LCM prompts you for the filter index.

2. Enter the filter number.

LCM displays the filter type field. LCM prompts you through 
all of the filter fields the same as when you add a filter. What 
you had previously entered is displayed in brackets [ ] as the 
default value. Make any changes you wish following the 
instructions for adding a filter.

To delete a filter complete the following steps:

1. Type: 

.

LCM prompts you for the filter index.

2. Enter the filter number.

LCM responds filter deleted.