Enterasys atx Betriebsanweisung

1-40

Introduction

The following conventions apply as you use LCM commands: 

 • Press the Return key to execute a command after you type it in.

 • A  port range is either a single port number, or a list of port 

numbers separated by commas or hyphens. For example, “3” is 
port 3; “3, 7” are ports 3 and 7; “3-5” are ports 3, 4, and 5; and “3-
5, 7” are ports 3, 4, 5, and 7. 

 • To quit any command press the Control-C keys (^C or Ctrl-C).

 • You can abbreviate any command where there is no ambiguity; 

if there is ambiguity, LCM responds with an error message. For 
example: 

ATX >ex

Error: ambiguous command 

 • Commands are not case sensitive.

 • Any invalid commands or misspellings entered will receive an 

error message.

 • The previous command can be repeated by typing “!!”.

 • MAC addresses are displayed in little-endian Ethernet bit order, 

with each octet separated by a colon. For example:

ATX >address 00:40:27:04:1a:0f

MAC addresses can be entered in big endian format (native FDDI 
and Token Ring format), by separating octets with spaces rather 
than colons.

 • The default values for filtering command field options appear in 

square brackets [ ], for example:

Type:

[Entry] (Entry/Exit)>