Enterasys atx Betriebsanweisung

3-12

Configuring

To display the IP routing functions that are enabled for all ports: 

Type: 

LCM responds with a list of all ports and the routing functions that 
are enabled. 

Usage: iproute [PORT-RANGE] [off] [on] [rip] 

[proxy] [bootp]]

Port 2 routing: IP Routing, RIP

Port 3 routing: IP Routing, RIP Bootp relay

Port 4 routing: IPX

Port 5 routing: IP Routing, Proxy ARP

.

.

.

Port 21 routing: IP Routing, 

You could also type: 

 to look at a 

specific port or ports. For example, 

 would display 

routing functions for ports 2, 3, and 4.

To turn off the IP routing functions for a port or port range:

Type: 

LCM responds:

Port 2 routing: Off

If you are enabling IPX routing, you need to assign unique 
addresses to the ports which will be performing routing functions. 
The LCM command for assigning IPX addresses is provided in the 
following section, 3.3.1 Assigning an IPX Address.