Enterasys atx Betriebsanweisung
Configuring
3-27
value of the Netbios aging timer. The age-timeout argument can be
modified and is interpreted in terms of seconds. This timer is the
amount of time a Netbios name remains in cache without activity.
The default will be the same as that for spanning tree which is 5
minutes or 300 seconds. To empty out all entries from cache, one
can set the timeout to zero. The default value is 300 seconds.
modified and is interpreted in terms of seconds. This timer is the
amount of time a Netbios name remains in cache without activity.
The default will be the same as that for spanning tree which is 5
minutes or 300 seconds. To empty out all entries from cache, one
can set the timeout to zero. The default value is 300 seconds.
nbtimer [age_timeout]
The nbname command requires at least one argument. If the
display option with the ANY argument is selected, all current
entries in cache will be displayed. If the display option with the
[nbname] option is selected, only that entry matching the Netbios
name is displayed. If the delete option is selected then provide the
Netbios name which you’d like to delete. To delete all entries from
cache, use the
display option with the ANY argument is selected, all current
entries in cache will be displayed. If the display option with the
[nbname] option is selected, only that entry matching the Netbios
name is displayed. If the delete option is selected then provide the
Netbios name which you’d like to delete. To delete all entries from
cache, use the
nbtimer
command.
nbname
{display[nb_name|big|any]|delete{nb_name|any}}
3.9 VIRTUAL WORKGROUP LCM COMMANDS
The LCM command format is:
workgroup name ports type info
name
1-16 characters; identifies the workgroup
ports
range of ports separated by (-) or (,)
type
ALL or IP or IPX
info
ip address\mask or ipx network number (hex or decimal);
NA for type ALL
Examples:
workgroup eng 3-7 all
workgroup sales 10,11,12,13 ip 134.141.141.0
255.255.255.0