Enterasys atx Verweisanleitung
ICMP Group
ATX MIB Reference Guide
2-17
ipNetToMediaPhysAddress
{ipNetToMediaEntry 2}
Physical Address Read-Write
The MAC address (for PPP ports, this should be a single byte of hexadecimal FF;
for FDDI and Token Ring ports, this should be little endian, although there are
some factions of the SNMP community which believe this should be big endian;
for Ethernet ports, this should be little endian).
for FDDI and Token Ring ports, this should be little endian, although there are
some factions of the SNMP community which believe this should be big endian;
for Ethernet ports, this should be little endian).
ipNetToMediaNetAddress
{ipNetToMediaEntry 3}
IP Address Read-Write
The IP address which corresponds to the ipNetToMediaPhysAddress.
ipNetToMediaType
{ipNetToMediaEntry 4}
Integer Read-Write
The type of address mapping, one of the following
•
other (1) - none of the below
•
invalid (2) - the entry should be considered to be non-existent
•
dynamic (3) - the mapping was dynamically learned
•
static (4) - the mapping was statically configured
2.4.4 IP Additional Objects
The TCP/IP additional IP objects are described below.
ipRoutingDiscards
{ip 23}
Counter Read-Only
The number of valid routing entries that were discarded.
2.5 ICMP GROUP
icmp
{mib-2 5}
The TCP/IP ICMP Group parameters are described below.
icmpInMsgs
{icmp 1}
Counter Read-Only
The total number of ICMP messages which were received by this unit. This
includes all messages represented by icmpInErrors.
includes all messages represented by icmpInErrors.