Enterasys atx Verweisanleitung
Chapter 2: TCP/IP MIB-II
2-22
ATX MIB Reference Guide
udpLocalAddress
{udpEntry 1}
IP Address Read-Only
The all zeroes IP address (0.0.0.0), which indicates that the UDP listener is
willing to accept UDP datagrams for any IP address associated with the unit.
willing to accept UDP datagrams for any IP address associated with the unit.
udpLocalPort
{udpEntry 2}
Integer Read-Only
The UDP port number, i.e., one of 69, 161, and 520. Note that reception of
SNMP Traps (UDP port number 162) is not supported by the unit.
SNMP Traps (UDP port number 162) is not supported by the unit.
2.8 EGP GROUP
egp
{mib-2 8}
The EGP Group is not supported since the unit does not support EGP.
2.9 OIM SUBTREE
cmot
{mib-2 9}
The OSI Subtree, as defined in OSI internet management Management
Information Base, RFC 1214 (L. LaBarre, editor), dated April 1991, is not
supported.
Information Base, RFC 1214 (L. LaBarre, editor), dated April 1991, is not
supported.
2.10 TRANSMISSION GROUP
transmission
{mib-2 10}
The supported TCP/IP Transmission Group parameters are described in later
sections of this document. The transmission group supported is:
sections of this document. The transmission group supported is:
dot3
{transmission 7}
dot5
{transmission 9}
fddi
{transmission 15}
ppp
{transmission 23}