Enterasys fn100 Betriebsanweisung
Troubleshooting
Fast Network 100 User Guide
Page 5-5
Table 5-3 describes the FN100 button functions.
5.4 TROUBLESHOOTING
This section lists several situations that could happen while using the
FN100, and suggests appropriate action. Because every situation is
potentially unique, the corrective actions suggested here should be
considered as guidelines only.
FN100, and suggests appropriate action. Because every situation is
potentially unique, the corrective actions suggested here should be
considered as guidelines only.
5.4.1 FN100 Does Not Power Up
If your FN100 does not power up, check each one of the following:
•
Make sure the power switch is set to 1 (on).
•
Make sure the power source is operational.
•
Make sure the power cord is securely connected.
•
Check the power supply fuse.
If problems persist, contact Cabletron Systems Technical Support.
Table 5-3
FN100 Button Functions
Button
Function
Select
Cycles through the Port Status mode options (TX,
RX, Act, Col, 100, and Usr) for all ports. The lower
port status LEDs of the ports you are monitoring
are activated based on what function you chose
with the Select button.
RX, Act, Col, 100, and Usr) for all ports. The lower
port status LEDs of the ports you are monitoring
are activated based on what function you chose
with the Select button.
Reset
Restarts the FN100.