Enterasys fn100 Verweisanleitung
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
Chapter 6: Cabletron MIB
Page 6-36
Fast Network 100 MIB Reference Guide
sfprotoRipListen
{sfsprotoEntry 4}
Integer Read-Write
Specifies whether the port should listen for RIP packets so the FN100 can build a
routing table to communicate with an NMS. Values include:
routing table to communicate with an NMS. Values include:
enabled (1)
disabled (2)
sfprotoTrunking
{sfsprotoEntry 5}
Integer Read-Write
Specifies whether Cabletron’s trunking protocol is to be used over this port.
Values include:
Values include:
enabled (1)
disabled (2)
6.3.10 Cabletron Trunking Group
sftrunk
{es-1fe 10}
This group deals with Cabletron’s trunking protocol.
sftrunkTable
{sftrunk 1}
Not-Accessible
This table describes the trunking status and attributes of the interfaces that are
configured for bridge trunking.
configured for bridge trunking.
sftrunkEntry
{sftrunkTable 1}
Not-Accessible
An entry exists for every port that has trunking enabled.
sftrunkIfIndex
{sftrunkEntry 1}
Integer Read-Only
Identifies the port that is configured for trunking.