Enterasys fn100 Verweisanleitung
Fast Network 100 MIB Reference Guide
Page 2-1
CHAPTER 2
TCP/IP MIB-II
The FN100 supports the TCP/IP MIB-II, as defined by
Management Information
Base for network management of TCP/IP-based internets MIB-II
, RFC 1213 (K.
McCloghrie, editor), dated March 1991. The MIB is divided into groups of
parameters. The individual groups are described in the subsections below. You
may want to refer to the actual TCP/IP MIB, since this document paraphrases the
standard MIB in order to provide FN100-related descriptions.
parameters. The individual groups are described in the subsections below. You
may want to refer to the actual TCP/IP MIB, since this document paraphrases the
standard MIB in order to provide FN100-related descriptions.
2.1 SYSTEM GROUP
system
{mib-2 1}
The TCP/IP System Group parameters are described below.
sysDescr
{system 1}
DisplayString Read-Only
A textual description of the FN100, including the full name and version
identification of the software and hardware (refer to sfswDesc and
sfhwManufData). The text obeys the format “A<CR><LF>B<CR><LF>
identification of the software and hardware (refer to sfswDesc and
sfhwManufData). The text obeys the format “A<CR><LF>B<CR><LF>
FN100
Version 1.0x1b1 1-Sep-95
FN100. FN100. Wed 11/22/95
08:35:42
501-3100-002 x00002e4-0506552
Version 1.0x1b1 1-Sep-95
FN100. FN100. Wed 11/22/95
08:35:42
501-3100-002 x00002e4-0506552
sysObjectID
{system 2}
Object Identifier Read-Only
The identifier of the variable used to identify the type of entity. Cabletron’s MIB
sysID parameter will have a value that indicates that it is a bridge. So
sysObjectID contains the object identifier of the Cabletron MIB sysID object,
i.e., {1 3 6 1 4 1 97 5 3}.
sysID parameter will have a value that indicates that it is a bridge. So
sysObjectID contains the object identifier of the Cabletron MIB sysID object,
i.e., {1 3 6 1 4 1 97 5 3}.
NOTE
The access types of some of the TCP/IP MIB parameters have
been extended from Read-Only to Read-Write. However,
unless otherwise indicated, the access type of all parameters is
as indicated in the standard MIB.
been extended from Read-Only to Read-Write. However,
unless otherwise indicated, the access type of all parameters is
as indicated in the standard MIB.