Enterasys fn100 Verweisanleitung
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
Chapter 2:
TCP/IP MIB-II
Page 2-6
Fast Network 100 MIB Reference Guide
ifOutErrors
{ifEntry 20}
Counter Read-Only
The number of packets that were to be transmitted out the port, but incurred
transmission hardware errors.
transmission hardware errors.
ifOutQLen
{ifEntry 21}
Gauge Read-Only
The maximum length ever obtained by the port’s outbound packet queue (in
packets) is not available, so this value is always one.
packets) is not available, so this value is always one.
ifSpecific
{ifEntry 22}
Object Identifier Read-Only
The object identifier of the MIB for the type of port, i.e., one of the following:
{dot3}
for Ethernet ports (dot3 is defined later, as {transmission 7}).
{ppp}
for the UART (ppp is defined later, as {experimental 18}).
2.3 ADDRESS TRANSLATION GROUP
at
{mib-2 3}
Not supported.
2.4 IP GROUP
ip
{mib-2 4)
The TCP/IP IP Group parameters are described below.
ipForwarding
{ip 1}
Integer Read-Write
Whether the FN100 is an IP router. This value is always host (2). Attempts to
write a different value to this field will not change its value, and “badValue”
GetResponse PDUs are returned for all such SetRequest PDUs.
write a different value to this field will not change its value, and “badValue”
GetResponse PDUs are returned for all such SetRequest PDUs.
ipDefaultTTL
{ip 2}
Integer Read-Write
The value, in seconds, to insert into the Time-To-Live field of the IP header when
this FN100 creates IP datagrams.
this FN100 creates IP datagrams.