Enterasys fn100 Verweisanleitung
IP Group
Fast Network 100 MIB Reference Guide
Page 2-9
ipFragFails
{ip 18}
Counter Read-Only
The number of IP datagrams that have been discarded because they needed to be
fragmented but could not be (e.g. because their “Don’t Fragment” flag was set).
fragmented but could not be (e.g. because their “Don’t Fragment” flag was set).
ipFragCreates
{ip 19}
Counter Read-Only
The number of IP datagram fragments that have been generated by this FN100.
2.4.1 IP Address Table
The TCP/IP IP Address Table contains the IP addressing information for each
port. The parameters are described below.
port. The parameters are described below.
ipAddrTable
{ip 20}
Not-Accessible
A list of IP address entries; one per IP address. If a port has not yet learned its IP
address, then an ipAddrEntry might not exist for the port (i.e., having an
ipAddrEntry with an IP address of zero is not acceptable).
address, then an ipAddrEntry might not exist for the port (i.e., having an
ipAddrEntry with an IP address of zero is not acceptable).
ipAddrEntry
{ipAddrTable 1}
Not-Accessible
A set of objects for an ipAddrTable entry. The individual components are
described below.
described below.
ipAdEntAddr
{ipAddrEntry 1}
IP Address Read-Only
The IP address itself. Although this field is Read-Only, the FN100’s sfifIPAddr
parameter can be written to affect changes.
parameter can be written to affect changes.
ipAdEntIfIndex
{ipAddrEntry 2}
Integer Read-Only
The port number that has the indicated IP address.
ipAdEntNetMask
{ipAddrEntry 3}
IP Address Read-Write
4
The network/subnet mask associated with the IP address. For SetRequests, a
mask of zero may be specified, in which case, the FN100 will create the correct
mask of zero may be specified, in which case, the FN100 will create the correct
4.
The standard MIB definition is Read-Only.