Enterasys fn100 Verweisanleitung
Fast Network 100 MIB Reference Guide
Page 3-1
CHAPTER 3
ETHERNET MIB
The FN100 supports the Ethernet MIB as defined in Definitions of Managed
Objects for the Ethernet-like Interface Types, RFC 1284 (J. Cook, editor), dated
December 1991.
Objects for the Ethernet-like Interface Types, RFC 1284 (J. Cook, editor), dated
December 1991.
The MIB tree prefix for reaching the Ethernet group is:
1.3.6.1.2.1.10.
transmission
{mib-2 10}
3.1 GENERIC ETHERNET-LIKE GROUP
dot3
{transmission 7}
dot3Table
{dot3 1}
Not-Accessible
A list of interface entries; one per Ethernet port. The entry instances correspond
to the FN100’s port numbers.
to the FN100’s port numbers.
dot3Entry
{dot3Table 1}
Not-Accessible
A set of operational attributes for an Ethernet entry. The individual components
are described below.
are described below.
dot3Index
{dot3Entry 1}
Integer Read-Only
The FN100’s Ethernet port number.
dot3InitializeMAC
{dot3Entry 2}
Integer Read-Write
Whether the port has been initialized. Initializing a port automatically resets all
of the port’s statistics, and enables transmit and receive (the receiver will be in
promiscuous mode). The value of dot3InitializeMAC is not saved in the event
that the FN100 reboots. Values include:
of the port’s statistics, and enables transmit and receive (the receiver will be in
promiscuous mode). The value of dot3InitializeMAC is not saved in the event
that the FN100 reboots. Values include:
initialized (1)
uninitialized (2)