Enterasys 6000 Betriebsanweisung

The following procedures describe how to

assign one or more ports to a Classification Rule,

set all ports simultaneously to a Classification Rule, or 

enable all selected ports to forward frames with the Classification Rule by adding that 
Classification Rule to the Port VLAN List of each port.

Port 
(Read-Only)

See the number of each port.

Classify
(Toggle)

See which ports are set to the VID/Classification displayed in the 
Classification Rule field above the Port and Classify column headings. 
This field toggles between YES and NO, which determines whether or 
not the associated port is set to the VID/Classification indicated in the 
Classification Rule field. 

NOTE: As each Classify field is highlighted, the Event 
Message Line (not shown) at the top of the screen indicates 
the port type. For example: Fast Ethernet Front Panel, FTM 
Backplane Port 3, and Gigabit Ethernet VHSIM.

If a port cannot be configured, NO will be displayed without 
brackets.

In some cases the Classify field [NO] may have an asterisk 
next to it. The asterisk indicates this classification rule is 
active as a result of application by policy.

SET ALL PORTS 
(Toggle)

Set all ports to the VLAN and Classification shown in the 
Classification Rule field. The SET ALL PORTS field toggles between 
NO and YES with NO as the default setting. YES associates all ports 
set to YES to the VID/Classification shown in the Classification Rule 
field.

SET PORTS TO 
VLAN 
FORWARDING
(Toggle)

Add the VLAN and classification shown in the Classification Rule 
field to the Port VLAN List of all ports set to YES. The SET PORTS 
TO VLAN FORWARDING field toggles between NO and YES with 
NO as the default setting. YES adds all the ports set to YES to the 
VLAN Forwarding list of the switch module.