Enterasys 6000 Betriebsanweisung

To exit LM using the RETURN command, proceed as follows:

1. Use the arrow keys to highlight the RETURN command at the bottom of the Local Management 

screen.

2. Press ENTER. The previous screen in the Local Management hierarchy displays. 

3. Exit from Local Management by repeating steps 1 and 2 until the Device Menu screen displays.

4. To end the LM session, use the arrow keys to highlight the RETURN command at the bottom 

of the Device Menu screen.

5. Press ENTER. The Local Management Password screen displays and the session ends.

If a particular Local Management screen has more than one screen to display its information, the 
NEXT and PREVIOUS commands are used to navigate between its screens. 

To go to the next or previous display of a screen, proceed as follows:

1. Highlight the applicable NEXT or PREVIOUS command at the bottom of the screen.

2. Press ENTER. The screen displays.

The CLEAR COUNTERS

command is used to temporarily reset all counters of a screen to zero to 

allow you to observe counter activity over a period of time. To reset the counters, perform the 
following steps:

1. Use the arrow keys to highlight the CLEAR COUNTERS command.

2. Press ENTER, the counters are reset to zero.

NOTE: The user can also exit Local Management screens by pressing ESC twice. This 
exit method does not warn about unsaved changes and all unsaved changes are lost.