Enterasys 5g102-06-g Betriebsanweisung

Prior to accessing a module via a network connection, you must first configure the module with a 
valid IP address, subnet mask, and default gateway using an out-of-band connection or the BOOTP 
protocol.

Once the module is configured, you can establish a Telnet session from any TCP/IP based node on 
the network. Telnet connections to the module require the community name passwords assigned in 
the SNMP Configuration screen. 

For information about setting the IP address, refer to 

For information about assigning community names, refer to 

. 

Refer to the instructions included with the Telnet application for information about establishing a 
Telnet session.