Enterasys a2h124-24 Benutzerhandbuch

Connectivity

1-4 Introduction

The SecureStack A2 switch connects to Ethernet networks or workstations via the fixed 
front panel MT‐RJ and RJ45 ports and the two SFP uplink ports that support optional 
Mini‐GBICs.

At the time of this printing, the Mini‐GBICs that are available from Enterasys and 
supported by the A2 switch are described in 

. These Mini‐GBICs meet or exceed 

the IEEE 802.3z‐1998 standard.

MGBIC-LC01

Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a 
standard LC connector. For optical and operating range specifications, refer to 
“

MGBIC-LC03

Provides one 1000BASE-SX Long Haul LC fiber-optic multimode port with a 
standard LC duplex connector. For optical and operating range specifications, 
refer to “

MGBIC-LC09

Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a 
standard LC connector. For optical and operating range specifications, refer to 
“

MGBIC-MT01

Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a 
standard MT-RJ connector. For optical and operating range specifications, refer 
to “

MGBIC-08

Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a 
standard LC connector. For optical and operating range specifications, refer to 
“

MGBIC-02

Provides one RJ45 copper connection that is compliant with the 1000BASE-T 
standard RJ45 connector. For operating range specifications, refer to