Enterasys a2h124-24 Installationsanweisungen
Surface Wallmount Installation
3-8 Installing the RoamAbout R2
Surface Wallmount Installation
Follow the step-by-step procedure below to install the RoamAbout R2 on the surface of a
wall, cubical wall, vertical support structure, or ceiling.
wall, cubical wall, vertical support structure, or ceiling.
1.
Make sure the site primary power for the RoamAbout R2 conforms to the
specifications detailed in
specifications detailed in
2.
Select the optimum mounting location:
• With easy access for inspection and service.
• If using remote power, close to the 10BaseT/100BaseT Ethernet network cable
connector.
• If not using remote power, within six feet of an AC electrical outlet:
(a) If using redundant power (connecting both local power and remote power).
or
(b) If using the local power option and not using the remote power option.
3.
Remove the mounting bracket from the RoamAbout R2:
a.
Completely loosen the captive screw.
b.
Slide the bracket until the two screw slots are directly below the two mounting
screws.
screws.
c.
Lift and remove the bracket from the RoamAbout R2.
Remove
Mounting Bracket
Captive
Screw
Screw
Slot
Screw