Enterasys 6000 Betriebsanweisung
Configuring SNA
8-15
Systematic Redirection
will redirect (if
Y
) all calls to the alternate subscribers specified by the Redirection
Addresses. Consecutive attempts at call redirection will be made to each alternate sub-
scriber in the list, until the call is completed.
scriber in the list, until the call is completed.
Redirect on Busy
will redirect calls (if
Y
) according to the Redirection Addresses if the primary sub-
scriber device is busy.
Redirect on Out of Order
will redirects calls (if
Y
) according to the Redirection Addresses if the primary sub-
scriber device is out of order.
Priority
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
ority has no effect on traffic exiting a node.)
A priority is also configured in Node Defaults, as well as for each logical port, SNA
PU, LLC2 host, Bridge port/LLC2 Interface, IP interface, IPX interface, and PVC
connection. The device processor in the node uses these priorities to help determine
the order in which it will process protocols.
PU, LLC2 host, Bridge port/LLC2 Interface, IP interface, IPX interface, and PVC
connection. The device processor in the node uses these priorities to help determine
the order in which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
traffic being routed on other connections in the node.
1st, 2nd,etc. Path Configured
includes or excludes the associated LP/port as a routing path to the subscriber device.
At least one path must be specified.
At least one path must be specified.
LP/Port
identify the port(s) that make up the routing path(s).
Redirection Address 0,1,etc.
are up to five subscribers that will be called according to the specified redirection
option.
option.