Enterasys zx-250 Benutzerhandbuch

SmartCell ZX-250 User Guide   4-5

Switch Administration

ATM Routing  

4.2.2

UNI Routes

Use the 

 command to create UNI routes. For example, connect an end station adapter (with MAC address 

00:11:22:33:44:55) to port A2 of the SmartCell ZX-250. If the adapter does not support ILMI or its ILMI is 
incompatible with the SmartCell ZX-250, you must create a static UNI route between the adapter and port A2 of the 
SmartCell ZX-250.

s•

Enter the 

 command to obtain the netprefix of port A2

SmartCell ZX # show netprefix

PortNumber(ALL)                           : a2

 Port#   NetPrefix

============================================================================

A2       39:00:00:00:00:00:00:00:00:00:14:59:00

SmartCell ZX #

¢•

Reconfigure the adapter with an ATM address made from the netprefix of port A2 and the adapter’s 
MAC address: 39:00:00:00:00:00:00:00:00:00:14:59:00:00:11:22:33:44:55:00.

••

Use the 

 command to create a static UNI route that specifies port A2 and the adapter’s 

new ATM address.

SmartCell ZX # add atmroute

PortNumber(A1)                            : a2

AtmAddress()                              : 39:00:00:00:00:00:00:00:00:00:14:59:00:00:11:22:33:44:55:00

PrefixLength(152)                         :

Index(0)                                  :

Type(Internal)                            :

Scope(0)                                  :

MetricsTag(0)                             :

SmartCell ZX #

T•

Enter the 

 command to check that the UNI route was added.

SmartCell ZX # show atmroute

AddressNumber(ALL)                        :

No. Port Route Address                                            Type Protocol

================================================================================

1    B4  39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:d4:14:41:80   I   MGMT

2    B4  39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:d4:14:41:81   I   MGMT

3    --  39:00:00:00:00:00:00:00:00:00:14:59:00                     I   PNNI

4    A2  39:00:00:00:00:00:00:00:00:00:14:59:00:00:11:22:33:44:55   I   MGMT

5    --  39:00:00:00:00:00:00:00:00:00:28:e9:80                     I   PNNI

6    --  39:00:00:00:00:00:00:00:00:00:28:f5:00                     I   PNNI

7    B4  47:00:79:00:00:00:00:00:00:00:00:00:00:00:a0:3e:00:00:01   I   MGMT

8    B2  52:00:00:00:00:00:00:00:00:00:14:51:80                     I   MGMT

SmartCell ZX #SmartCell ZX #

The UNI route appears in the table as route number four (No. 4).

2p›F

For UNI routes to work with certain devices, ILMI may also need to be disabled 
on the SmartCell ZX-250. Use the 

 command to disable ILMI on 

the SmartCell ZX-250 on a per-port basis.