Enterasys 1805 Betriebsanweisung
18 ELS100-S24TX2M User Interface
ELS100-S24TX2M
Selection
Description
Device Control Menu
Port Configuration
Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
communication mode to auto-negotiation, full duplex or half
duplex.
Port Information
Displays operational status, including link state, flow control
method, and duplex mode.
method, and duplex mode.
Spanning Tree
Configuration
Configuration
Enables Spanning Tree Algorithm; also sets parameters for
hello time, maximum message age, switch priority, and
forward delay; as well as port priority and path cost.
hello time, maximum message age, switch priority, and
forward delay; as well as port priority and path cost.
Spanning Tree
Information
Information
Displays full listing of parameters for the Spanning Tree
Algorithm.
Algorithm.
Mirror Port
Configuration
Configuration
Sets the source and target ports for mirroring.
Port Trunking
Configuration
Configuration
Specifies ports to group into aggregate trunks.
IGMP Configuration
Configures IGMP multicast filtering.
Extented Bridge
Configuration
Configuration
Displays/configures extended bridge capabilities provided by
this switch, including support for traffic classes, GMRP
multicast filtering, and VLAN extensions.
this switch, including support for traffic classes, GMRP
multicast filtering, and VLAN extensions.
802.1P Configuration
Configures default port priorities and queue assignments.
802.1Q VLAN
Base Information
Base Information
Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported.
number and maximum VLANs supported.
802.1Q VLAN Current
Table Information
Table Information
Displays VLAN groups and port members.
802.1Q VLAN Static
Table Configuration
Table Configuration
Configures VLAN groups via static assignments, including
setting port members, or restricting ports from being
dynamically added to a port by the GVRP protocol.
setting port members, or restricting ports from being
dynamically added to a port by the GVRP protocol.
802.1Q VLAN
Port Configuration
Port Configuration
Displays/configures port-specific VLAN settings, including
PVID, ingress filtering, and GVRP.
PVID, ingress filtering, and GVRP.
Port GARP
Configuration
Configuration
Configures settings used in multicast filtering.
Network Monitor Menu
Port Statistics
Displays statistics on network traffic passing through the
selected port.
selected port.
RMON Statistics
Displays detailed statistical information for the selected port
such as packet type and frame size counters.
such as packet type and frame size counters.
Unicast Address Table
Provides full address listing, as well as search and clear
functions.
functions.
IP Multicast
Registration Table
Registration Table
Displays all the multicast groups active on this switch,
including multicast IP addresses and corresponding VLAN
IDs.
including multicast IP addresses and corresponding VLAN
IDs.
Static Unicast Address
Table Configuration
Table Configuration
Used to manually configure host MAC addresses in the
unicast table.
unicast table.
System Restart
Restarts system with options to use POST, or to retain
factory defaults, IP settings, or user authentication settings.
factory defaults, IP settings, or user authentication settings.
Exit
Exits the configuration program.