Enterasys els100-8txuf2 Benutzerhandbuch
![Enterasys](https://files.manualsbrain.com/attachments/0d61cd0d9a60e36f1a6c1364af6a0a9788bcf75b/common/fit/150/50/0c43aa9c6913c8f0c68912f62e6506afc95280a8d9a1fc71e52e7f54646e/brand_logo.jpeg)
9033029
Product Overview 3
Figure 1-2 shows the port Link, Speed and Collision LEDs. The port LEDs
are grouped to the left of their corresponding RJ-45 ports. Table 1-2
defines the performance of the port LEDs.
are grouped to the left of their corresponding RJ-45 ports. Table 1-2
defines the performance of the port LEDs.
Figure 1-2. Port LEDs
Table 1-2. Port LEDs Defined
Rear Panel
Figure 1-3 shows the ELS100-8TXUF2 rear panel, which includes a
connector for the DC power adapter.
connector for the DC power adapter.
Figure 1-3. ELS100-8TXUF2 Rear Panel
LED
Function
Link LED
On: Indicates a valid connection (link) on the associated port.
Off: Indicates no link on the associated port.
100 LED
On: Indicates the port is in the 100Base-TX mode.
Off: Indicates the port is in the 10Base-T mode.
Collision LED
Flashing: Indicates packet collisions detected on this port.This is a nor-
mal situation for CSMA/CD Ethernet. Note that collisions do not occur
on full-duplex links.
mal situation for CSMA/CD Ethernet. Note that collisions do not occur
on full-duplex links.
Off: Indicates no packet collisions detected on this port.
ELS100-8TXUF2.book Page 3 Friday, June 4, 1999 4:01 PM