Enterasys 6000 Verweisanleitung
MI B Ref erence
107
The number is always
300
unless the node is an FRX7000.
::= { nlLlc2HostTable.1.16 }
nlLlc2HostGroup
SYNTAX:
INTEGER (
1–4
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Traffic group associated with LLC2 interface. The number
is always
1
unless the node is an FRX7000.
::= { nlLlc2HostTable.1.17 }
nlLlc2TermConnectionTable (LLC2.2)
This is a table of terminated hosts.
nlLlc2TermConnectionSequence (netlink.7.6.2.1.1)
SYNTAX:
INTEGER (
1–16
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:LLC2 Host connection sequence number (a simple
identifier for each entry).
::= { nlLlc2TermConnectionTable.1.1}
nlLlc2TermConnectionHSAP
SYNTAX:
INTEGER (
4–254
)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Service Access Point address used to connect to the host.
This must match the SSAP (source SAP) in a frame
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
::= { nlLlc2TermConnectionTable.1.2}
nlLlc2TermConnectionLocalSubscriberId
SYNTAX:
NlSubscriberAddress
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:LLC2 Host Connection's Local Subscriber ID. If
configuring an LLC2-to-SDLC link, this ID must match
the Remote Subscriber configured on the SNA port for the
the Remote Subscriber configured on the SNA port for the