Enterasys 6000 Verweisanleitung
110
Cabletron Relay Access Products
DESCRIPTION:LLC2 Host Connection's Local Subscriber ID. If
configuring an LLC2-to-SDLC link, this ID must match
the Remote Subscriber configured on the SNA port for the
SDLC device. If configuring an LLC2-to-LLC2 connec-
tion, this ID must match the Remote Subscriber ID of the
remote node's LLC2 Host.
the Remote Subscriber configured on the SNA port for the
SDLC device. If configuring an LLC2-to-LLC2 connec-
tion, this ID must match the Remote Subscriber ID of the
remote node's LLC2 Host.
::= { nlLlc2OrigConnectionTable.1.4}
nlLlc2OrigConnectionRemoteSubscriberId
SYNTAX:
NlSubscriberAddress
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:LLC2 Host Connection's Remote Subscriber ID, assigned
to the remote end of the SNA connection. If configuring an
LLC2-to-SDLC link, this ID must match the Local
Subscriber configured on the SNA port for the SDLC
device. If configuring an LLC2-to-LLC2 connection, this
ID must match the Local Subscriber ID of the remote
node's LLC2 Host.
LLC2-to-SDLC link, this ID must match the Local
Subscriber configured on the SNA port for the SDLC
device. If configuring an LLC2-to-LLC2 connection, this
ID must match the Local Subscriber ID of the remote
node's LLC2 Host.
::= { nlLlc2OrigConnectionTable.1.5}
nlLlc2OrigConnectionIDBLK
SYNTAX:
INTEGER (
0–4095
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:This is used in conjunction with
IDNUM
(see next entry) in
generating the Node field in an XID frame (format 0 or 3)
to establish a link station connection to the host.
to establish a link station connection to the host.
::= { nlLlc2OrigConnectionTable.1.6}
nlLlc2OrigConnectionIDNUM
SYNTAX:
INTEGER (
0–1048575
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:This is used in conjuction with
IDBLK
(see previous entry)
in generating the Node field in an XID frame (format 0 or
3) to estblish a link station connection to the host. If both
3) to estblish a link station connection to the host. If both
IDBLK
and
IDNUM
are set to
0
, the Node field of the XID
will be provided by the attached SDLC device. (The node
will send an XID command to the remote node to indicate
will send an XID command to the remote node to indicate