Enterasys 6000 Verweisanleitung
MI B Ref erence
27
DESCRIPTION:Incoming Excess Burst Size (B
E
), the maximum amount of
incoming data above the Committed Burst Size (B
C
) that
the network will try to transfer on the DLCI during the
interval determined by B
interval determined by B
C
/CIR.
::= { portDLCIConfigTable.1.8}
portDLCIOutgoingBe
SYNTAX:
INTEGER (
0–32767
) (Kbits)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Outgoing Excess Burst Size (B
E
), the maximum amount of
outgoing data above the Committed Burst Size (B
C
) that
the network will try to transfer on the DLCI during the
interval determined by B
interval determined by B
C
/CIR.
::= { portDLCIConfigTable.1.9}
portDLCIBecnRecoveryCnt
SYNTAX:
INTEGER (
1–255
) (packets)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:BECN Recovery Count, a method of controlling the rate of
return to maximum traffic flow after it has been reduced
due to congestion. The value determines the number of
packets received sequentially without BECN set, before
increasing the Excess Burst Size (B
due to congestion. The value determines the number of
packets received sequentially without BECN set, before
increasing the Excess Burst Size (B
E
) by 1/8 of its confi-
gured value.
::= { portDLCIConfigTable.1.10}
portDLCIPriority
SYNTAX:
INTEGER (
0–4
)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Priority of the DLCI among others on the physical port.
0
is the lowest priority and
4
is the highest.
::= { portDLCIConfigTable.1.11}
portDLCIRowStatus
SYNTAX:
RowStatus
ACCESS:
Read/Write
STATUS:
Mandatory