Enterasys 6000 Verweisanleitung
166
Cabletron Relay Access Products
snaDLC (RFC1747) MIB
sdlcPortGroup (snaDLC.1)
sdlcPortAdminTable (sdlcPortGroup.1)
sdlcPortAdminName
SYNTAX:
DisplayString (1–10 characters)
MAX-ACCESS: Read/Write
STATUS:
STATUS:
current
DESCRIPTION:Defines the physical port to which this interface is
assigned. It has implementation-specific significance. Its
value must be unique within the administered system. It
must contain only ASCII-printable characters. Should an
implementation choose to accept a
value must be unique within the administered system. It
must contain only ASCII-printable characters. Should an
implementation choose to accept a
write
operation for this
object, it causes the logical port definition associated with
the table instance to be moved to a different physical port.
A
the table instance to be moved to a different physical port.
A
write
operation will not take effect until the port is cycled
inactive.
::= { sdlcPortAdminTable.1.1}
sdlcPortAdminRole
SYNTAX:
INTEGER {
1
(Primary),
2
(Secondary),
3
(Negotiable)}
MAX-ACCESS: Read/Write
STATUS:
STATUS:
current
DESCRIPTION:Describes the role that the link station will assume the next
time a connection is established. Even though this is
defined as a port object, it is a link station attribute in the
sense that a role is per link station. However, it is not
possible to vary link station roles on a particular port. For
example, if an SDLC port is configured as
defined as a port object, it is a link station attribute in the
sense that a role is per link station. However, it is not
possible to vary link station roles on a particular port. For
example, if an SDLC port is configured as
Primary
, all link
stations on that port must be
Primary
.
::= { sdlcPortAdminTable.1.2}
sdlcPortAdminType
SYNTAX:
INTEGER {
1
(Leased),
2
(Switched)}
MAX-ACCESS: Read/Write
STATUS:
STATUS:
current