Enterasys 2200 Betriebsanweisung

7. In some cases, a selection in the subclassification field requires a user defined value to be entered 

in a third field to the right of the subclassification field. If so, use the arrow keys to highlight that 
third field. Otherwise, go to 

.

8. Type in the appropriate value.

9. Use the arrow keys to highlight the ADD command field.

10.Press ENTER to save the VID and Classification settings. After a brief delay, the VID, 

Classification, and Description will display in the top half of the screen.

All, or one or more, line items can be deleted as follows:

To delete all the configured VID/Classification/Description line items, use the arrow keys to 
highlight the DEL ALL command field and press ENTER.

To delete one or more entries, mark each entry and then delete them, as follows:

1. Use the arrow keys to highlight a line to be deleted.

2. Press the M key and an asterisk (*) appears next to the highlighted line to mark it. The DEL ALL 

command is changed to DEL MARKED.

3. If more than one line item is to be deleted, repeat 

 to mark each line. 

4. After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.

5. Press ENTER. The marked line items are deleted.

NOTE: If for some reason you want to remove a mark, perform 

 and 

Pressing M when a marked line is highlighted will remove the mark. If all marks are 
removed, the DEL MARKED command is changed back to DEL ALL.