Enterasys 6e128-26 Betriebsanweisung
Chapter 5: Local Management
5-104
6E128-26, 6E138-25, 6E129-26 and 6E139-25 User’s Guide
5.30
NETWORK TOOLS
The Network Tools function resides on both the 6E12X-26 and 6E13X-25
and allows the user to access and manage network devices.
and allows the user to access and manage network devices.
To Access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Module or Chassis Menu screen
and press ENTER. At the command line, type “help” and press ENTER.
The Network Tools help screen displays.
NETWORK TOOLS menu item in the Module or Chassis Menu screen
and press ENTER. At the command line, type “help” and press ENTER.
The Network Tools help screen displays.
Figure 5-36
Network Tools Help Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
•
Built-in Commands – Allow the user to access and manage network
devices. The commands are arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft_reset, telnet, link_trap, and
atm_stp_state.
devices. The commands are arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft_reset, telnet, link_trap, and
atm_stp_state.
-> help
090829
arp
netstat
show
traceroute
defroute
ping
reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
Commands Available to User
Built in Commands:
Welcome to Network Tools
soft_reset
telnet
link_trap
atm_stp_state