Enterasys 6e128-26 Betriebsanweisung

The General Configuration screen, 

, allows the user to set the 

system date and time, IP address and subnet mask, the default gateway, 
the TFTP gateway IP address, the operational mode, the management 
mode, set the screen refresh and lockout times, and the COM port 
configuration. The General Configuration screen also allows the user to 
Clear NVRAM, and enable or disable IP Fragmentation.

To access the General Configuration screen from the Module 
Configuration Menu screen, use the arrow keys to highlight the 
GENERAL CONFIGURATION menu item and press ENTER. The 
General Configuration screen, 

The following briefly explains each General Configuration screen field:

MAC Address (Read-Only)

Displays the base physical address of the module.

Firmware Revision:      XX.XX.XX

General Configuration

2311_15

BOOTPROM Revision: XX.XX.XX

MAC Address:

IP Address:

Subnet Mask:

Default Gateway:

TFTP Gateway IP Addr:

Module Date:

Module Time:

Screen Refresh Time:

Screen Lockout Time:

Com:  [ENABLED]                 Application:           [LM]   

Clear NVRAM       [NO]

Module Uptime XX D  XX H  XX M

Module Type: 6E128-26

Slot Number: 

IP Fragmentation  [ENABLED]

Operational Mode:  [802.1D SWITCHING]

Management  Mode:  [DISTRIBUTED]

00-00-ID-00-00-00

6E128-26  LOCAL MANAGEMENT

Event Message Line