Enterasys 9500 Installationsanweisungen
2-3
The Reset Switch
The Reset Switch
The Reset switch is located on the front panel, under the top plastic tab as shown
in Figure 2-2. It serves two functions:
in Figure 2-2. It serves two functions:
¥
Pressing the Reset switch twice within three seconds causes the processor
(i960) to reset.
(i960) to reset.
¥
Pressing and holding the switch on for three or more seconds causes the
module to shutdown. Pressing and holding the button again for three seconds
restarts the module.
module to shutdown. Pressing and holding the button again for three seconds
restarts the module.
SNMP management may be used to disable this switch to enhance module
security.
security.
Figure 2-2. The Reset Switch
!
CAUTION
Resetting the 9A686-04 will cause a brief period of system downtime. When the
interface module is reset, the remaining modules attached to the CTM go through
an initialization process to determine which interface module will become the
module that performs specific management functions.
interface module is reset, the remaining modules attached to the CTM go through
an initialization process to determine which interface module will become the
module that performs specific management functions.
Reset Switch
2031_03
9A686-04