Marantz dv7010 Benutzerhandbuch

51

The Setup screen  

 menu 

[96 kHz PCM Out]

setting is set to 

[96 kHz]

. Digital output is prohibited on

some discs.
\ Be sure to make analog audio connections as well as

digital connections (

).

The disc is dirty.
\ Refer to 

‘Disc Care’

 (

).

The connection plugs are not inserted fully into the
terminals or are not connected.
\ Check that all connection plugs are firmly inserted.

The connection plug or terminal is dirty.
\ Check that the plugs and terminals are wiped clean of

dirt, etc.

Audio cable connection is wrong.
\ Check to make sure that the audio cables are

connected correctly (

).

Connection is made to the stereo amplifier‘s PHONO input
terminal.
\ Change connection to any input terminal except

PHONO.

The pause mode is engaged.
\ Press 

 

3 to exit the pause mode.

Stereo amplifier operation is incorrect.
\ Check input (CD, AUX, etc.) selector to determine if it

is selected for DVD playback.

The DVD or CD is recorded in DTS audio.
\ DTS audio is only output from the digital output jacks.

Connect the digital output on the player to the digital
input on a receiver or amplifier with a built in DTS
decoder to hear DTS audio.

DVDs and CDs use different recording methods.
\ This is not a malfunction.

Static electricity or other external influence may cause
malfunctioning of this unit. In this case, unplugging the
power cord and then re-plugging it in will usually reset the
unit for proper operation. If this does not correct the
problem, please consult your nearest MARANTZ service
center.