Nokia E60 Verbindungsanleitung
Creating Internet connections
6
Copyright © 2006 Nokia. All rights reserved.
Creating an Internet access point
for packet data (GPRS)
for packet data (GPRS)
1 Select Menu
→
Tools
→
Settings
→
Connection
→
Access points
.
2 The list of existing access points is shown. Press
Options
→
New access point
to create a new Internet
access point.
To use an existing access point as a basis for the new
one, select
To use an existing access point as a basis for the new
one, select
Use existing settings
. To start with an empty
access point, select
Use default settings
.
3 Define the following settings:
•
Connection name
— Type a descriptive name for the
Internet access point, such as My GPRS Internet.
•
Data bearer
— Select
Packet data
.
•
Access point name
— Enter the name for the access
point. The name is usually provided by your service
provider or network operator.
provider or network operator.
•
User name
— Enter your user name if required by the
service provider. User names are often case-
sensitive and provided by your service provider.
sensitive and provided by your service provider.
•
Prompt password
— Select
Yes
to enter your password
each time you log into a server or
No
to save the
password in your device memory and automate the
login.
login.
•
Password
— Enter your password if required by the
service provider. The password is often case-
sensitive and provided by the service provider.
sensitive and provided by the service provider.
•
Authentication
— Select
Secure
to always send your
password encrypted or
Normal
to send your
password encrypted when possible.
•
Homepage
— Enter the Web address of the page you
want to display as a home page when you use this
access point.
access point.
4 After setting up a basic Internet access point for
Packet
data
(GPRS), select
Back
to save the settings and exit,
or
Options
→
Advanced settings
to define the following
advanced settings:
•
•
Network type
— Select
IPv4
or
IPv6
as the Internet
protocol type. The Internet protocol defines how
data is transferred to and from your device.
data is transferred to and from your device.
•
Phone IP address
— Enter the IP address of your
device. Select Automatic to have the network
provide the device IP address. This setting is
available only if you have selected
provide the device IP address. This setting is
available only if you have selected
Network type
→
IPv4
.
•
DNS address
— Enter the IP addresses of the
Primary
DNS address
and
Secondary DNS addr.
if required by