TiVo series2 dt Betriebsanweisung

Network Settings

Network Settings are different depending on the type of home network your TiVo DVR is 
connected to: Wired (Ethernet) or Wireless.

For more information about connecting your DVR to a home network and using Home Media 
Features, download the Home Media Features Guide at 

Wired (Ethernet) settings are usually automatic. If you connect an Ethernet cable to the DVR’s 
Ethernet jack, the DVR will inform you if you need to specify any network settings.

If the wireless adapter you connected requires a firmware update, the DVR 

informs you. Press SELECT to begin the firmware update.

Wireless networks have a 

network name (sometimes called an SSID for Service 
Set Identifier).

This screen lists the names of nearby wireless networks 
that your DVR has been able to identify. If you have a 
wireless router (or wireless access point) and you did 
not set a network name, your network is probably using 
a name supplied by the router’s manufacturer.

If your network’s name is listed, select it. (You may be 

able to see more network names by pressing CHAN DOWN to scroll down the screen.)

Otherwise, select Enter Network Name, then select Done Entering Text when you are finished.

You must use capital and lowercase 

letters appropriately when entering a 

network name. To find a network named 

“My Network” you must capitalize the “M” 

and “N”; entering “my network” won’t work. 

Use THUMBS UP

®

 and THUMBS DOWN

®

 to 

change to uppercase or lowercase.

®

Gemini.book  Page 62  Monday, April 10, 2006  11:06 AM