Sceptre x32bv-naga Betriebsanweisung
SCEPTRE X32 HDTV User Manual
- 35 -
www.SCEPTRE.com
3. Press
the
↵ button to go into TUNER MODE function.
4. Press
the
▲ or ▼ buttons to select the options AIR or CABLE.
5.
If you have an antenna connected to the X32 LCD HDTV, please select AIR
as your option by pressing the
as your option by pressing the
↵ button.
6.
If you have cable connected to your X32 LCD HDTV, please select CABLE as
your option by pressing the
your option by pressing the
↵ button. An additional option will pop up.
Please use the ▲ or ▼ buttons to select AUTO as your cable option and
press
press
↵ to confirm the selection.
7.
Once you have made the selection, the OSD will return you back to
CHANNEL main options. Press the ▼ button to highlight the AUTO SCAN
function and press
CHANNEL main options. Press the ▼ button to highlight the AUTO SCAN
function and press
↵ twice to start scanning for channels.
8.
Once the scanning is done, you can watch the TV.
Please Note :
•
Not all broadcasts are in High Definition (HD). Please refer to your
local broadcasting stations for more information.
local broadcasting stations for more information.
•
The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X32 LCD HDTV
might lose picture or sound.
requires a stronger signal than normal TVs. If you cannot achieve
that signal level with your antenna or cable, your X32 LCD HDTV
might lose picture or sound.