Sceptre x32gv-komodo Betriebsanweisung

SCEPTRE X32 HDTV User Manual 

- 14 - 

www.SCEPTRE.com 

 

 
 

 

 
 
The following descriptions are for connections from left to right. 
 
SERVICE – This port is for factory service by Sceptre’s technicians only. 
 
LINE OUT - This connection port is used for sending out audio signals to other 
audio devices such as stereo/surround sound receivers and sending out video 
signals to other video device such as TV monitor or VCR.  The red (R) and white 
(L) connectors send out the audio signal.  The yellow (AV OUT) connector sends 
out the video signal.  The orange (COAXIAL SPDIF OUT) connector sends out 
either bit-stream or PCM digital sound signal to a home theater receiver with 
digital input.  This connection uses RCA audio cable for sound, composite cable 
for video, and a coaxial cable for digital out.  Please note : You can only use the 
red/white connection or the orange one.   Do NOT connect both. 
 
HDMI – Connects to devices that use HDMI cable, such as Blu-ray or HD DVD 
player, or HD cable / satellite set-top box.  This connection port receives pure 
digital audio and high definition signal through one single cable.  This port also 
can accept a HDCP video device for video. 
 
VGA - This connection port connects to a PC for video using VGA cable. Be sure 
to connect your audio cable to the VGA Stereo input if you want sound out of 
VGA video source. 
 
VGA STEREO INPUT - This connection port is for people who want to provide 
audio to the TV when using a PC or a DVI video device. The sources uses 
3.5mm mini-jack audio cable to provides audio for a HDCP enabled DVI video 
device or PCs with VGA connection. 
 
COMPONENT 1 & 2 (YPbPr with Audi L/R) – These connection ports are for 
DVD players, or satellite / cable set-top boxes that use component cables.  From 
left to right, connect green, blue, and red for video, and then connect white for left 
channel audio, and red for right channel audio.