Grandstream gxw-4004 Benutzerhandbuch
Grandstream Networks, Inc.
GXW400x User Manual
Page 14 of 36
Firmware 1.0.1.8
Last Updated: 5/2008
Example configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"
FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "7"
Hunt Group 1 contains ports 1, 2, 3. Hunt Group 4 contains ports 4, 5, 6.
Hunt Group 7 contains ports 7, 8.
Please be aware, the choice of 1 for ports 2 and 3, the choice of 4 for ports 5 and 6, the choice 7 for port
8 is required to indicate that the SIP account tied to port market as “Active” will be used for all members
of the same Hunting group. Needless to say, those members of the same Hunting group may not be
sequential ports. In following example ports 3, 5 and 7 tied to SIP Account configured in Port #1 marked
as “Active”, and ports 4,6,8 tied to SIP Account configured in Port #2 marked as “Active” as well.
Example of not sequential configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
Hunt Group 7 contains ports 7, 8.
Please be aware, the choice of 1 for ports 2 and 3, the choice of 4 for ports 5 and 6, the choice 7 for port
8 is required to indicate that the SIP account tied to port market as “Active” will be used for all members
of the same Hunting group. Needless to say, those members of the same Hunting group may not be
sequential ports. In following example ports 3, 5 and 7 tied to SIP Account configured in Port #1 marked
as “Active”, and ports 4,6,8 tied to SIP Account configured in Port #2 marked as “Active” as well.
Example of not sequential configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"
FXS Port #2: SIP UserID and Authenticate ID entered, Hunting Group set to "Active"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #4: SIP UserID and Authenticate ID left blank, Hunting group set to "2"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"
FXS Port #7: SIP UserID and Authenticate ID left blank, Hunting group set to "1"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"
Note: A single call directed to the SIP account will NOT result in all ports ringing at the same time. They
will ring in the hunting group only. This feature is applicable to incoming calls only.
will ring in the hunting group only. This feature is applicable to incoming calls only.
I
NTER
-
PORT
C
ALLING
In some cases a user may want to make phone calls between GXW ports when the gateway will be used
as stand alone unit, without any SIP server. This feature will also be applicable when the gateway is used
in mode Hunting Groups and will be registered to SIP server only with one master number. In such cases
users still will be able to make inter-port calls by using the IVR feature. For example the user connected
to port 1 can reach the user connected to port 3 by dialing *** and 73. Digit 7 indicated using inter-port
calling feature, digit 3 indicates port number which should be reached. At the same manner the user
connected to port 4 can reach the user connected to port 8 by dialing *** and 78.
as stand alone unit, without any SIP server. This feature will also be applicable when the gateway is used
in mode Hunting Groups and will be registered to SIP server only with one master number. In such cases
users still will be able to make inter-port calls by using the IVR feature. For example the user connected
to port 1 can reach the user connected to port 3 by dialing *** and 73. Digit 7 indicated using inter-port
calling feature, digit 3 indicates port number which should be reached. At the same manner the user
connected to port 4 can reach the user connected to port 8 by dialing *** and 78.
PSTN
P
ASS
T
HROUGH
/L
IFE
L
INE
The RJ-11 line jack on the GXW400x side connected to legacy PSTN line, functions as a pass through
jack when the GXW400x loses power or becomes unregistered. In this case, analog phone connected to
FXS port 1 will be directly connected to RJ-11 jack marked as LINE. The pass through/life line mode
enables the user to use the analog phone for PSTN calls directly without using an access code.
jack when the GXW400x loses power or becomes unregistered. In this case, analog phone connected to
FXS port 1 will be directly connected to RJ-11 jack marked as LINE. The pass through/life line mode
enables the user to use the analog phone for PSTN calls directly without using an access code.