Pantech link ii Betriebsanweisung

Put the contacts of the battery into the hole located at the bottom of

the unit. Insert and press the upper side of the battery until you hear
the “click”. Make sure you align the gold contacts at the battery end with
contacts on the phone. If the contacts at the battery are not properly
aligned, damage could occur to the phone and the battery.

3. To remove the battery, push the bottom of the battery to upwards and

remove the battery. To remove the SIM card, slide the SIM card in the
direction of the arrow as shown.

4. To fit the battery cover, put it on the guide rail and push up.

Charging your battery

1. To charge, connect the charger adapter as shown right.

Make sure you align the connector as shown right. If not, it will damage
the charging connector on the phone and will not charge.

2. To remove the adapter connection, pull the adapter away as shown

right.