Mamiya 645af Benutzerhandbuch

 

 

 

 

 

When there are no batteries in the camera, the shutter's "Safety Retraction" feature, 
keeps it in the open position and the magazine's dark slide cannot be pulled out, even 
when it is attached to the camera. Film winding and shutter release are also blocked in 
this case. 

1. Remove the camera's rear body cap and the 
magazine's protection cap. 

2. Fit the body coupler of the magazine into the 
bottom channel of the camera, properly 
centered. 
3. Push the magazine against the camera body 
until it snaps into place. (You will instantly hear 
the shutter closing) 

The precision shutter blades are made of very thin hyper-duraluminum and could 
be damaged if unprotected. Therefore the camera is designed to automatically 
retract the shutter into the open position when the magazine is removed. When it 
is reattached the shutter automatically closes and is ready for normal function. 
(Batteries must be in camera). 

  

There is no need to line up the film's paper leader start mark. The magazine auto- 
matically advances the film to the first frame (See page 22). 

1. Insert the dark slide into the magazine. 

2. With your thumb first push button “A” down and 
then simultaneously button “B” in. The magazine 
will separate itself from the camera body. 

19

20