Uniden udw10003 Benutzerhandbuch

10

Adjust the volume of the audio from the camera. Choose a value from 0 (off) 

through 20 (maximum).

Set the length of time the receiver spends on each active camera during a scan 

(see page 15) or activate quad display (see page 16).

CAM1 – CAM4

Turn each of the four camera channels On (enabled) or Off (disabled).

Pair a camera to the selected channel (see page 13).

System Setup sub-menu

Adjust the brightness of the display. Choose a value from 1 (min) through 15 

(max).

Change the video output format from NTSC (North America) to PAL (Europe).

Turn on power save mode. If you set this to field to Auto, the display turns off 

if it’s idle for more than one minute. (The audio will remain active.) To turn the 

display back on, press 

.

Reset the receiver to factory defaults. Any changes or settings will be lost.

To open the menu,

press

The selected 

item is 

highlighted

Use

and

to move 

the cursor

Use

and

to scroll 

through the 

options for 

the item

To close the menu, press

To open the 

System Setup 

sub-menu, press

To open the menu,

press

The selected 

item is 

highlighted

Use

and

to move 

the cursor

Use

and

to scroll 

through the 

options for 

the item

To close the menu, press

To open the 

System Setup 

sub-menu, press