Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Uniden
  4. udw10003
  5. Benutzerhandbuch

Uniden udw10003 Benutzerhandbuch

Download
Seite von 24
7
Using the camera mount
The camera has a built-in stand so you can place it on any flat 
surface. If you want to place your camera on a wall or a ceiling (or 
even if you just want to secure it to a flat surface), you can use 
the included camera mount. 
(You might want to bring the receiver along when you mount 
the camera; it’s much easier to get the the camera into the right 
position when you have the display handy.)
Hold the base of the mount where you want to attach it, and 
mark the location of the screw holes. 
Use the included screws and anchors to attach the base to the 
wall or ceiling.
Attach the camera to the mounting screw. Tighten it a few 
turns, then turn it to the direction you want. 
Tighten the camera brace up 
against the back of the camera to 
secure it into place.
Unlock the mounting post by 
turning the wingnut to the left a 
few turns.
Set the mounting post to the 
correct angle, then tighten the 
wingnut until the post is locked 
into place.
1.
2.
3.
4.
5.
6.
Camera
 brace
Mounting
 screw
Mounting
post
Post
lock
Screw
holes
Camera
 brace
Mounting
 screw
Mounting
post
Post
lock
Screw
holes
1
2
4
3
Loosen the 
wingnut to 
unlock the 
mounting
post.
Attach the camera 
to the mounting 
screw and turn it 
to the desired 
direction.
Adjust the post to 
the correct angle, 
then tighten the 
wingnut to lock the 
post into place.
Tighten the brace against 
the camera to
secure it
in place.
1
2
4
3
Loosen the 
wingnut to 
unlock the 
mounting
post.
Attach the camera 
to the mounting 
screw and turn it 
to the desired 
direction.
Adjust the post to 
the correct angle, 
then tighten the 
wingnut to lock the 
post into place.
Tighten the brace against 
the camera to
secure it
in place.