Yamaha yht-450 Verbindungsanleitung

Quick-Connect Guide

YHT-450

���

���

���� �������

Connect Center Speaker Wire to center speaker 

 

as shown. The 

positive (+) side of the wire with the white stripe attaches to the red 
terminal. Place all speakers in desired location as shown in Step 2, Room 
Layout.

Speaker Placement After connection of the speakers place them so they appear in the 

approximate positions as shown in the diagram above.

Yamaha created this package to greatly enhance your audio and home theater enjoyment. This Quick-Connect 
Guide will help you get started. Follow the steps to connect the speakers first. Then connect any of your 
other components. Refer to your Owner’s Manuals as well as those that came with your other components 
for complete instructions and precautions. Be sure that all components are not plugged in while making 
connections. 

You will need the following which are not included in the package: Phillips screwdriver, wire 

cutter/stripper, brackets, toggle bolts, molly anchor screws or sheet metal screws.

Connect Front Speakers Positive (+) side of the wire with white stripe 

attaches to (+) terminal. Negative (-) side attaches to (-) terminal. 

Receiver must not be plugged in while connecting speakers.

Connect Surround Speakers Positive (+) side of the wire with white 

stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. 

Receiver must not be plugged in while connecting speakers.

Connect Center Speaker Positive (+) side of the wire with white 

stripe attaches to (+) terminal. Negative (-) side attaches to (-) terminal. 

Receiver must not be plugged in while connecting speakers.

Connect Surround Back Speaker Positive (+) side of the wire 

with white stripe attaches to (+) terminal. Negative (-) side attaches to 
(-) terminal. 

Receiver must not be plugged in while connecting speakers.

Connect RCA Cable  Connect RCA cable 

 

to Input (L) Mono terminal 

on subwoofer 



. Set subwoofer VOLUME control to half-way mark and 

POWER to OFF. Connect RCA cable to receiver from subwoofer.

Components must not be plugged in while connecting them.

Connect Antennas to Receiver  Locate AM loop antenna and indoor 

FM antenna. Keeping receiver unplugged, connect as shown. For more 
information about obtaining clear reception and grounding, see your 
Owner’s Manual.













Inspect Contents  After unpacking, inspect the contents to confirm you have the above items: 



 HTR-5740 

A/V receiver with remote control, one NS-AP4400 speaker package with 

 

two front speakers, 



 two surround 

speakers, 

 

one surround back speaker, 

 

one center speaker, 

 

bulk speaker wire, 

 

RCA audio cable, 

 

audio/video RCA cable, and 

 

one YST-SW015 powered subwoofer. Also included, but not shown, are AM and FM 

antennas and related Owner’s Manuals.







 

to appropriate lengths for all speaker connections. 

Connect speaker wire for front 



, surround 



, and surround back 

 

speakers. The positive (+) side of the wire with the white stripe attaches to 
the red terminal. The negative (-) side attaches to the black terminal. (See your 
HTR-5740 Owner’s Manual for more information on speaker wire connections.)
Mount Surround Speakers (optional)  Fasten mounting screws into 

a firm wall or wall support. Leave 1/4” space between head and wall. Hang 
the keyholes on the speaker backs on the protruding screws. 

Please contact a reliable source about the best type of hardware 

for your particular wall’s construction. Secure installation is purchaser’s 
responsibility. See your Owner’s Manual for additional precautions.