Yamaha htr-5063 Betriebsanweisung
En
55
SETUP
Setting various functions (Setup menu)
■
Auto-adjusting Dolby Digital and DTS
dynamic range
dynamic range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) signal playback.
(Dolby Digital and DTS) signal playback.
■
Setting the maximum volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
loudly. The default setting of +16.5 dB produces the highest
volume.
■
Setting the startup volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode.
this parameter is set to “Off,” the volume is set at the level when the
receiver last entered standby mode.
J1
Setting HDMI functions
HDMI Setup submenu
Dynamic Range
Min/Auto
(Min) Sets the dynamic range suitable for low volume
or a quiet environment, such as at night, for bitstream
signals except for Dolby TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD
signals based on input signal information.
STD
Adjusts the dynamic range for optimum volume for
regular home use.
Max (Default)
Produces audio without adjusting the dynamic range.
Max Volume
Adjustable range
-30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting
+16.5 dB
Adjustment
increments
5.0 dB
Init.Volume
Adjustable range
Off, Mute, -80 dB to +16.5 dB
Default setting
Off
Adjustment
increments
0.5 dB
Control
Turns the HDMI Control on or off.
TV Audio In
J2
Chooses automatically selected audio input in
conjunction with TV operation when the
HDMI Control is turned on.
AudioReturnChan
J2
Transmits audio/video output to the TV and
audio input from the TV through a single
HDMI cable.
Standby Through
J2
Selects whether HDMI audio/video signals will
be continue to be produced when this unit is on
standby.
Audio Output
J2
Selects the audio output device connected to
this unit via HDMI jacks.
Resolution
Sets the resolution of video signals converted
from analog to HDMI.
Aspect
J3
Sets the horizontal-to-vertical ratio (aspect
ratio) of video signals converted from analog to
HDMI.
;
HDMI Setup
TV Audio In
;;;;;
AV4
.Control
;;;;;;;;;
On
[
p]/[[]:Select
AudioReturnChan
;
Off
Resolution
;;;
*Thrgh
[]/[]:Up/Down
p
[
J
1 :
When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max
Volume” setting has priority.
Volume” setting has priority.
J
2 :
This menu item appears depending on the “Control” setting.
J
3 :
This menu item appears depending on the “Resolution” setting.