Yamaha RX-397 Betriebsanweisung

Press FM/AM on the front panel to select FM 
as the reception band.
FM appears in the front panel display.

Press and hold MEMORY on the front panel 
for more than 3 seconds.
The preset station group and the MEMORY and 
AUTO indicators flash in the front panel display.

Press TUNING l / h once to begin 
automatic preset tuning.
Press h to tune into higher frequencies.
Press l to tune into lower frequencies.
When automatic preset tuning is complete, the 
frequency of the last preset station is shown in the 
front panel display.

• If TUNING l / h is not pressed within approximately 5 

seconds while the MEMORY and AUTO indicators are 
flashing, automatic preset tuning automatically begins from the 
currently displayed frequency and proceeds toward higher 
frequencies.

• Received stations are sequentially programmed to 8 stations in 

each preset station group (A1 to A8). If 8 stations are all 
programmed in a preset station group, another 8 stations are 
sequentially programmed in the next preset station group.

■ Customized automatic preset tuning

You can specify a preset station group and a preset station 
number from which this unit stores the FM stations 
received by automatic preset tuning.

Press A/B/C/D/E and then press one of the 
preset station number buttons on the front 
panel to select the preset station group and 
the preset station number where the first 
received station will be stored.
For example, if you select C5, the first received 
station is automatically programmed to C5 and the 
next received stations are sequentially programmed 
to C6, C7, etc.

Press TUNING l / h on the front panel to 
begin automatic preset tuning.
Press h to tune into higher frequencies.
Press l to tune into lower frequencies.
When automatic preset tuning is complete, the 
frequency of the last preset station is shown in the 
front panel display.

Automatic preset tuning stops when the received stations have all 
been stored up to E8.

l TUNING h

l TUNING h