Yamaha RX-N600 Benutzeranleitung

■

  SP IMP.

Use this feature to set the speaker impedance of this unit 
so that it matches that of your speakers.
Choices: 

Ω

, 6

Ω

MIN

• Select “8

Ω

MIN” to set the speaker impedance to 8 

Ω

 .

• Select “6

Ω

MIN” to set the speaker impedance to 6 

Ω 

.

*

The Canada model cannot use two separate speaker systems 
(A and B) simultaneously when “SP IMP.” is set to “8

Ω

MIN”.

■

  PRESET

Use this feature to reset all the parameters of this unit to 
the initial factory settings (see page 108).
Choices: 

, RESET

• Select “CANCEL” not to reset any parameters of this 

unit.

• Select “RESET” to reset the parameters of this unit.

• This setting completely resets all the parameters of this unit 

including the “SET MENU” parameters. However, the 
advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on 

this unit.

■

  N-RESET

Use this feature to reset the network settings of this unit 
(see page 84) to the initial factory settings.
Choices: 

, RESET

• Select “CANCEL” not to reset any network settings of 

this unit.

• Select “RESET” to reset the network settings of this 

unit.

• The initial factory settings are activated next time you turn on 

this unit.

• When the network settings are reset, “DHCP” in “NET/USB 

MENU” is automatically set to “ON” (see page 84) and the 
registered client ID of this unit on your YAMAHA MCX-2000 
is cleared (see page 105).

■

  REMOTE AMP

Use this feature to set the AMP ID of this unit for remote 
control recognition (see page 96).
Choices: 

, ID2

• Select “ID1” when the remote control AMP ID library 

code is set to “00001”.

• Select “ID2” when the remote control AMP ID library 

code is set to “00002”.

You need to set the corresponding remote control AMP library 
code for the remote control (see page 96).

8

Ω

MIN

Front

If you use one set (A or B), 
the impedance of each 
speaker must be 8

Ω

 or 

higher.

If you use two sets (A and 
B), the impedance of each 
speaker must be 16

Ω

 or 

higher.

*

Center

The impedance of each 
speaker must be 8

Ω

 or 

higher.

Surround

Surround back

6

Ω

MIN

Front

If you use one set (A or B), 
the impedance of each 
speaker must be 4

Ω

 or 

higher.

If you use two sets (A and 
B), the impedance of each 
speaker must be 8

Ω

 or 

higher.

Center

The impedance of each 
speaker must be 6

Ω

 or 

higher.

Surround

Surround back